Dave Smith Instruments Mopho Keyboard Spécifications télécharger pdf (Page 25)

Env Amount: 0…127 — Sets the amount of VCA envelope to the VCA level.

Env Velocity: 0…127 — Sets the amount of keyboard velocity controlling the

level of the VCA envelope.

Delay: 0...127 — Sets a delay between the time the amplifier envelope is

triggered and when the Attack portion actually begins.

Attack: 0…127 —

Sets the Attack time of the VCA ADSR envelope generator.

Decay: 0…127 — Sets the Decay time.

Sustain: 0…127 — Sets the Sustain level.

Release: 0…127 — Sets the Release time.

Program Volume: 0…127 — Sets the volume of the current program to match

volumes between programs.

Note: There is enough gain in the synth voice that with some settings,

some mild clipping distortion may be heard. If this happens, try lowering

the V

OICE VOLUME, and/or the VCA ENVELOPE AMOUNT (or VCA

ELOCITY AMOUNT).

LFO Parameters

Mopho has four Low Frequency Oscillators (LFOs). The same parameters are

available for each.

Frequency: 0…150, sync — Sets the LFO frequency. Range 0-150 for un-

synced LFO; speed ranges from slow (30 seconds) to very fast — at 90 (8 HZ,

C-2) and above the speed steps in semitones, up to 150 (261 Hz, middle C).

Note: Some of the analog functions may not respond well to the fastest

LFO speeds, due to speed limitations of the control voltages; but they

will certainly generate some interesting sounds.

Above 150, the sync speeds are as follows:

Display Timing Sync

32 Steps

Sequence speed divided by 32; i.e. one LFO cycle

takes 32 steps

16 Steps

Sequence speed divided by 16

8 Steps

Sequence speed divided by 8

6 Steps

Sequence speed divided by 6

4 Steps

Sequence speed divided by 4

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 51 52

Pas de commentaire

Dave Smith Instruments Mopho Keyboard Spécifications Page 25