Dave Smith Instruments Evolver Manuel d'utilisateur télécharger pdf (Page 44)

Combo Parameters

Combos are used to make different combinations of Programs, and use them in

different ways. You can use up to four different Parts, each with its own set of 16

parameters.

To edit the Combo parameters, first hit the desired C

OMBO PART Switch. The PARAM 1

knob now selects the parameter, and the P

ARAM 2 knob changes the value. The + and

– switches will increment/decrement the value also. The C

OMBO PART switches select

one of the four parts.

While playing a Combo, it is possible to edit the Program parameters of the individual

Parts, or of all the Parts together. If you turn a knob with no Parts selected (meaning

no Combo Part LEDs are on), the new value will go to all Parts. While this doesn’t

really make a lot of sense, since the Programs are often very different in each Part, it

turns out to be interesting to do quite often.

Otherwise, if you select a Part first, and then turn a knob, then just that Part will be

edited. This allows you to go between different parts while performing and change the

sound however you wish.

Note: You cannot save the individual programs in each Part while in Combo

mode. Since a Program can be used in many different Combos, saving the

changes will likely cause problems elsewhere.

Below we describe the 16 parameters for each Part. The upper LCD line shows the

Part number; lower lines are used for the parameter.

Mode: see table – Selects the polyphony of this Part. When a Combo is selected, it

starts assigning voices to Parts with Part 1. You cannot assign more than 4 voices.

For example, if you set both Part 1 and Part 2 to Poly 3, the total would be 6 voices,

so it obviously it will not work in a four voice instrument. In this case, it would assign

the first 3 voices to Part 1, and the last voice to Part 2, ignoring the rest of the Parts.

Looking at the voice LED’s on the front panel will help to see the voice operation.

Display Part Mode

Off

Don’t use this Part

Poly 4

Assign 4 voices to this Part

Poly 3

Assign 3 voices to this Part

Poly 2

Assign 2 voices to this Part

Mono

Assign 1 voice monophonically to this Part

Program: 1…128 – Selects the Program to use for this Part.

Bank: 1…3 – Selects the Bank of the Program to use for this Part.

MIDI Mode: see table – Selects the Program to use for this Part.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 75 76

Commentaires sur ces manuels

Pas de commentaire

Dave Smith Instruments Evolver Manuel d'utilisateur Page 44

Commentaires sur ces manuels